Floodlights are not better just because they are larger. Industrial yards, ports, loading zones and outdoor work areas care more about optics and aiming than raw wattage.
If the project targets port yard lighting in South Africa, industrial yard floodlights in Kenya or outdoor work area lighting in the UAE, place those terms naturally in FAQs or case notes.
Start with throw distance
The farther the target, the more control you need over beam and mounting height rather than wattage alone.
- Separate horizontal and slant distance
- Allow overlap
- Avoid lighting only the center
Then choose the beam angle
Narrow, medium and wide beams should be combined according to the width and depth of the target area.
- Use narrow beams farther away
- Prevent near hot spots
- Cut light at boundaries
Outdoor protection must be complete
IP, surge, wind loading and corrosion all belong in the selection sheet.
- Check bracket strength
- Inspect surge protection
- Leave service access
Keep the title product-led
Industrial Flood Lights for Ports, Yards and Outdoor Work Areas already includes the product and the scene; add parameter words after that.
- Add CCT or wattage
- Add mounting height
- Add region words
