News
Industrial Lighting News
Product selection guides, design notes and application insights for industrial lighting projects.
Smart Sensor High Bay Lights: Microwave and PIR Control for Warehouse Aisle Energy Saving
A practical guide to smart sensor high bay lights for warehouse aisles, comparing microwave and PIR control, energy saving logic and selection notes.
Read moreEnergy RetrofitFactory Lighting Energy Retrofit: Replacing Metal Halide Lamps with LED High Bay Lights
A practical retrofit guide for replacing metal halide fixtures with LED high bay lights, including energy calculation, payback logic and product selection advice.
Read moreTri-Proof & CleanroomHow to Select Tri-Proof and Cleanroom Lighting for Food Plants and Dusty Workshops
A practical guide to tri-proof and cleanroom luminaires for damp, dusty workshops, food plants and controlled production areas.
Read moreLighting DesignLED Lighting Design for High-Bay Industrial Workshops
For workshops above 8 meters, lighting design should balance mounting height, beam distribution, target lux level, uniformity and glare control.
Read moreEnergy RetrofitIndustrial Factory Lighting Retrofit ROI and Implementation Path
A factory retrofit guide covering LED high bay replacement, energy savings, maintenance cost reduction and implementation steps.
Read moreSafety StandardsCore Parameters for Explosion-Proof Light Selection
Hazardous area lighting must match zone classification, explosion-proof rating, temperature class, equipment protection level and enclosure rating.
Read moreProduct SelectionLED Tri-Proof Light Selection Guide: IP Rating, Material and Applications
Tri-proof light selection should consider IP65/IP66 protection, anti-corrosion materials, diffuser choice, mounting method and maintenance access.
Read moreCold StorageCold Storage LED Lighting Selection: Low-Temperature Start and Smart Control
Cold storage lighting requires reliable low-temperature startup, anti-condensation structure, IP65 protection, uniform racking aisle illumination and smart dimming.
Read moreOutdoor LightingCommon Layout Mistakes in Industrial Yard Floodlighting
Yard floodlighting should consider pole position, beam angle, glare control, obstacles and night work safety, with lighting simulation before installation.
Read moreHigh Bay LightingHow to Choose Between LED High Bay and UFO High Bay Lights by Mounting Height
Different mounting heights require different wattages and beam angles. Select high bay or UFO high bay lights according to ceiling height and work area.
Read moreRoad LightingTechnical Requirements for Industrial Park Road LED Lighting Retrofit
Industrial park road lighting retrofit should verify average illuminance, uniformity, CCT, glare, optics, pole spacing and smart control compatibility.
Read moreSmart ControlHow Smart Sensor High Bay Lights Reduce Warehouse Energy Waste
Warehouse lighting can reduce wasted energy with sensor dimming. Compare microwave and PIR controls by detection range, false trigger risk and installation method.
Read moreCleanroom LightingCleanroom LED Lighting Design: From GMP Requirements to Luminaire Selection
Cleanroom lighting should balance sealed construction, easy-clean surfaces, low dust accumulation and uniform illumination for food, pharma and electronics plants.
Read moreSolar Lighting2025 Solar Lighting for Industrial Parks: Battery, Panel, Controller and Installation Position
2025 solar lighting suits industrial roads, perimeters, temporary yards and areas with difficult cabling. Check sunlight, autonomy days and maintenance access.
Read moreRoad Lighting2025 Industrial Park Road LED Lighting Retrofit: Pole Spacing, Optics, CCT and Acceptance
2025 industrial park road lighting retrofit should verify pole height, spacing, road width, average lux, uniformity and glare for safe night traffic.
Read moreCleanroom Lighting2025 Food and Pharma Cleanroom Lighting: How to Select GMP-Ready Cleanroom Luminaires
2025 cleanroom lighting focuses on sealed construction, easy cleaning, low dust accumulation, glare control and uniform illumination for food, pharma and electronics plants.
Read moreOutdoor Lighting2025 Industrial Yard Floodlight Layout: Pole Position, Optics, Glare Control and Night Safety
2025 yard lighting should balance pole position, throw distance, optics, glare control and boundary impact instead of simply choosing high wattage.
Read moreSmart Control2025 Warehouse Smart Lighting: Sensor High Bay, Zone Dimming and Energy Control
2025 warehouse lighting should use zone control for aisles, loading areas, picking zones and auxiliary spaces. Sensor high bays reduce idle energy use.
Read moreCold Storage2025 Cold Storage LED Lighting: Low-Temperature Start, Anti-Condensation and Aisle Lux
2025 cold storage lighting needs low-temperature startup, sealed anti-condensation design, IP protection, rack shadow control and smart sensors.
Read moreProduct Selection2025 LED Tri-Proof Light Selection: IP65 Protection, Materials and Workshop Applications
2025 tri-proof light selection should compare IP rating, housing material, diffuser, mounting method and maintenance access, not price alone.
Read moreSafety Standards2025 Explosion-Proof Industrial Lighting Guide: Rating, Temperature Class and Installation Environment
2025 hazardous area lighting must match zone classification, explosion-proof marking, temperature class, IP rating and mounting method.
Read moreEnergy Retrofit2025 Factory Lighting Energy Retrofit: How to Calculate Payback for LED High Bay Replacement
2025 retrofit projects often replace metal halide, sodium or old fluorescent fixtures with LED high bay lights. This article explains energy saving and payback calculation.
Read moreLighting Design2025 Factory LED Industrial Lighting Design: Lux Level, Uniformity and Mounting Height
2025 factory lighting design should start from mounting height, work-plane lux level, beam angle, glare control and maintenance factor instead of wattage alone.
Read moreSolar Lighting2024 Solar Lighting for Industrial Parks: Battery, Panel, Controller and Installation Position
2024 solar lighting suits industrial roads, perimeters, temporary yards and areas with difficult cabling. Check sunlight, autonomy days and maintenance access.
Read moreRoad Lighting2024 Industrial Park Road LED Lighting Retrofit: Pole Spacing, Optics, CCT and Acceptance
2024 industrial park road lighting retrofit should verify pole height, spacing, road width, average lux, uniformity and glare for safe night traffic.
Read moreCleanroom Lighting2024 Food and Pharma Cleanroom Lighting: How to Select GMP-Ready Cleanroom Luminaires
2024 cleanroom lighting focuses on sealed construction, easy cleaning, low dust accumulation, glare control and uniform illumination for food, pharma and electronics plants.
Read moreOutdoor Lighting2024 Industrial Yard Floodlight Layout: Pole Position, Optics, Glare Control and Night Safety
2024 yard lighting should balance pole position, throw distance, optics, glare control and boundary impact instead of simply choosing high wattage.
Read moreSmart Control2024 Warehouse Smart Lighting: Sensor High Bay, Zone Dimming and Energy Control
2024 warehouse lighting should use zone control for aisles, loading areas, picking zones and auxiliary spaces. Sensor high bays reduce idle energy use.
Read moreCold Storage2024 Cold Storage LED Lighting: Low-Temperature Start, Anti-Condensation and Aisle Lux
2024 cold storage lighting needs low-temperature startup, sealed anti-condensation design, IP protection, rack shadow control and smart sensors.
Read moreProduct Selection2024 LED Tri-Proof Light Selection: IP65 Protection, Materials and Workshop Applications
2024 tri-proof light selection should compare IP rating, housing material, diffuser, mounting method and maintenance access, not price alone.
Read moreSafety Standards2024 Explosion-Proof Industrial Lighting Guide: Rating, Temperature Class and Installation Environment
2024 hazardous area lighting must match zone classification, explosion-proof marking, temperature class, IP rating and mounting method.
Read moreEnergy Retrofit2024 Factory Lighting Energy Retrofit: How to Calculate Payback for LED High Bay Replacement
2024 retrofit projects often replace metal halide, sodium or old fluorescent fixtures with LED high bay lights. This article explains energy saving and payback calculation.
Read moreLighting Design2024 Factory LED Industrial Lighting Design: Lux Level, Uniformity and Mounting Height
2024 factory lighting design should start from mounting height, work-plane lux level, beam angle, glare control and maintenance factor instead of wattage alone.
Read moreSolar Lighting2023 Solar Lighting for Industrial Parks: Battery, Panel, Controller and Installation Position
2023 solar lighting suits industrial roads, perimeters, temporary yards and areas with difficult cabling. Check sunlight, autonomy days and maintenance access.
Read moreRoad Lighting2023 Industrial Park Road LED Lighting Retrofit: Pole Spacing, Optics, CCT and Acceptance
2023 industrial park road lighting retrofit should verify pole height, spacing, road width, average lux, uniformity and glare for safe night traffic.
Read moreCleanroom Lighting2023 Food and Pharma Cleanroom Lighting: How to Select GMP-Ready Cleanroom Luminaires
2023 cleanroom lighting focuses on sealed construction, easy cleaning, low dust accumulation, glare control and uniform illumination for food, pharma and electronics plants.
Read moreOutdoor Lighting2023 Industrial Yard Floodlight Layout: Pole Position, Optics, Glare Control and Night Safety
2023 yard lighting should balance pole position, throw distance, optics, glare control and boundary impact instead of simply choosing high wattage.
Read moreSmart Control2023 Warehouse Smart Lighting: Sensor High Bay, Zone Dimming and Energy Control
2023 warehouse lighting should use zone control for aisles, loading areas, picking zones and auxiliary spaces. Sensor high bays reduce idle energy use.
Read moreCold Storage2023 Cold Storage LED Lighting: Low-Temperature Start, Anti-Condensation and Aisle Lux
2023 cold storage lighting needs low-temperature startup, sealed anti-condensation design, IP protection, rack shadow control and smart sensors.
Read moreProduct Selection2023 LED Tri-Proof Light Selection: IP65 Protection, Materials and Workshop Applications
2023 tri-proof light selection should compare IP rating, housing material, diffuser, mounting method and maintenance access, not price alone.
Read moreSafety Standards2023 Explosion-Proof Industrial Lighting Guide: Rating, Temperature Class and Installation Environment
2023 hazardous area lighting must match zone classification, explosion-proof marking, temperature class, IP rating and mounting method.
Read moreEnergy Retrofit2023 Factory Lighting Energy Retrofit: How to Calculate Payback for LED High Bay Replacement
2023 retrofit projects often replace metal halide, sodium or old fluorescent fixtures with LED high bay lights. This article explains energy saving and payback calculation.
Read moreLighting Design2023 Factory LED Industrial Lighting Design: Lux Level, Uniformity and Mounting Height
2023 factory lighting design should start from mounting height, work-plane lux level, beam angle, glare control and maintenance factor instead of wattage alone.
Read moreSolar Lighting2022 Solar Lighting for Industrial Parks: Battery, Panel, Controller and Installation Position
2022 solar lighting suits industrial roads, perimeters, temporary yards and areas with difficult cabling. Check sunlight, autonomy days and maintenance access.
Read moreRoad Lighting2022 Industrial Park Road LED Lighting Retrofit: Pole Spacing, Optics, CCT and Acceptance
2022 industrial park road lighting retrofit should verify pole height, spacing, road width, average lux, uniformity and glare for safe night traffic.
Read moreCleanroom Lighting2022 Food and Pharma Cleanroom Lighting: How to Select GMP-Ready Cleanroom Luminaires
2022 cleanroom lighting focuses on sealed construction, easy cleaning, low dust accumulation, glare control and uniform illumination for food, pharma and electronics plants.
Read moreOutdoor Lighting2022 Industrial Yard Floodlight Layout: Pole Position, Optics, Glare Control and Night Safety
2022 yard lighting should balance pole position, throw distance, optics, glare control and boundary impact instead of simply choosing high wattage.
Read moreSmart Control2022 Warehouse Smart Lighting: Sensor High Bay, Zone Dimming and Energy Control
2022 warehouse lighting should use zone control for aisles, loading areas, picking zones and auxiliary spaces. Sensor high bays reduce idle energy use.
Read moreCold Storage2022 Cold Storage LED Lighting: Low-Temperature Start, Anti-Condensation and Aisle Lux
2022 cold storage lighting needs low-temperature startup, sealed anti-condensation design, IP protection, rack shadow control and smart sensors.
Read moreProduct Selection2022 LED Tri-Proof Light Selection: IP65 Protection, Materials and Workshop Applications
2022 tri-proof light selection should compare IP rating, housing material, diffuser, mounting method and maintenance access, not price alone.
Read moreSafety Standards2022 Explosion-Proof Industrial Lighting Guide: Rating, Temperature Class and Installation Environment
2022 hazardous area lighting must match zone classification, explosion-proof marking, temperature class, IP rating and mounting method.
Read moreEnergy Retrofit2022 Factory Lighting Energy Retrofit: How to Calculate Payback for LED High Bay Replacement
2022 retrofit projects often replace metal halide, sodium or old fluorescent fixtures with LED high bay lights. This article explains energy saving and payback calculation.
Read moreLighting Design2022 Factory LED Industrial Lighting Design: Lux Level, Uniformity and Mounting Height
2022 factory lighting design should start from mounting height, work-plane lux level, beam angle, glare control and maintenance factor instead of wattage alone.
Read moreSolar Lighting2021 Solar Lighting for Industrial Parks: Battery, Panel, Controller and Installation Position
2021 solar lighting suits industrial roads, perimeters, temporary yards and areas with difficult cabling. Check sunlight, autonomy days and maintenance access.
Read moreRoad Lighting2021 Industrial Park Road LED Lighting Retrofit: Pole Spacing, Optics, CCT and Acceptance
2021 industrial park road lighting retrofit should verify pole height, spacing, road width, average lux, uniformity and glare for safe night traffic.
Read moreCleanroom Lighting2021 Food and Pharma Cleanroom Lighting: How to Select GMP-Ready Cleanroom Luminaires
2021 cleanroom lighting focuses on sealed construction, easy cleaning, low dust accumulation, glare control and uniform illumination for food, pharma and electronics plants.
Read moreOutdoor Lighting2021 Industrial Yard Floodlight Layout: Pole Position, Optics, Glare Control and Night Safety
2021 yard lighting should balance pole position, throw distance, optics, glare control and boundary impact instead of simply choosing high wattage.
Read moreSmart Control2021 Warehouse Smart Lighting: Sensor High Bay, Zone Dimming and Energy Control
2021 warehouse lighting should use zone control for aisles, loading areas, picking zones and auxiliary spaces. Sensor high bays reduce idle energy use.
Read moreCold Storage2021 Cold Storage LED Lighting: Low-Temperature Start, Anti-Condensation and Aisle Lux
2021 cold storage lighting needs low-temperature startup, sealed anti-condensation design, IP protection, rack shadow control and smart sensors.
Read moreProduct Selection2021 LED Tri-Proof Light Selection: IP65 Protection, Materials and Workshop Applications
2021 tri-proof light selection should compare IP rating, housing material, diffuser, mounting method and maintenance access, not price alone.
Read moreSafety Standards2021 Explosion-Proof Industrial Lighting Guide: Rating, Temperature Class and Installation Environment
2021 hazardous area lighting must match zone classification, explosion-proof marking, temperature class, IP rating and mounting method.
Read moreEnergy Retrofit2021 Factory Lighting Energy Retrofit: How to Calculate Payback for LED High Bay Replacement
2021 retrofit projects often replace metal halide, sodium or old fluorescent fixtures with LED high bay lights. This article explains energy saving and payback calculation.
Read moreLighting Design2021 Factory LED Industrial Lighting Design: Lux Level, Uniformity and Mounting Height
2021 factory lighting design should start from mounting height, work-plane lux level, beam angle, glare control and maintenance factor instead of wattage alone.
Read moreSolar Lighting2020 Solar Lighting for Industrial Parks: Battery, Panel, Controller and Installation Position
2020 solar lighting suits industrial roads, perimeters, temporary yards and areas with difficult cabling. Check sunlight, autonomy days and maintenance access.
Read moreRoad Lighting2020 Industrial Park Road LED Lighting Retrofit: Pole Spacing, Optics, CCT and Acceptance
2020 industrial park road lighting retrofit should verify pole height, spacing, road width, average lux, uniformity and glare for safe night traffic.
Read moreCleanroom Lighting2020 Food and Pharma Cleanroom Lighting: How to Select GMP-Ready Cleanroom Luminaires
2020 cleanroom lighting focuses on sealed construction, easy cleaning, low dust accumulation, glare control and uniform illumination for food, pharma and electronics plants.
Read moreOutdoor Lighting2020 Industrial Yard Floodlight Layout: Pole Position, Optics, Glare Control and Night Safety
2020 yard lighting should balance pole position, throw distance, optics, glare control and boundary impact instead of simply choosing high wattage.
Read moreSmart Control2020 Warehouse Smart Lighting: Sensor High Bay, Zone Dimming and Energy Control
2020 warehouse lighting should use zone control for aisles, loading areas, picking zones and auxiliary spaces. Sensor high bays reduce idle energy use.
Read moreCold Storage2020 Cold Storage LED Lighting: Low-Temperature Start, Anti-Condensation and Aisle Lux
2020 cold storage lighting needs low-temperature startup, sealed anti-condensation design, IP protection, rack shadow control and smart sensors.
Read moreProduct Selection2020 LED Tri-Proof Light Selection: IP65 Protection, Materials and Workshop Applications
2020 tri-proof light selection should compare IP rating, housing material, diffuser, mounting method and maintenance access, not price alone.
Read moreSafety Standards2020 Explosion-Proof Industrial Lighting Guide: Rating, Temperature Class and Installation Environment
2020 hazardous area lighting must match zone classification, explosion-proof marking, temperature class, IP rating and mounting method.
Read moreEnergy Retrofit2020 Factory Lighting Energy Retrofit: How to Calculate Payback for LED High Bay Replacement
2020 retrofit projects often replace metal halide, sodium or old fluorescent fixtures with LED high bay lights. This article explains energy saving and payback calculation.
Read moreLighting Design2020 Factory LED Industrial Lighting Design: Lux Level, Uniformity and Mounting Height
2020 factory lighting design should start from mounting height, work-plane lux level, beam angle, glare control and maintenance factor instead of wattage alone.
Read more