Product Category

LED Cold Storage and Cold Chain Lighting

LED cold-storage and cold-chain lighting for freezers, refrigerated warehouses and loading areas, covering low-temperature start, condensation, sealing, aisle optics and controls.

Cold-storage lighting must do more than start at low temperature. It must withstand temperature cycling, condensation, frost, switching and rack obstruction, so drivers, sealing, thermal paths and cable entries need low-temperature verification.

A cold-chain park includes racking, ante rooms, loading docks, sorting and plant rooms. These zones can use different low-temperature fixtures, aisle optics and sensor controls instead of running the whole site at full power.

Selection checklist

Selection factorProject check
Minimum temperatureConfirm the minimum operating temperature of the fixture and driver against room temperature and operating cycles.
Condensation and sealingTemperature transitions can cause condensation, so check seals, pressure balance and cable entries.
Rack opticsHigh-rack aisles need useful vertical illumination while controlling bright spots on the floor.
Switching and sensorsFrequently accessed zones can use low-temperature-compatible sensors and zoning.
MaintenancePlan service access, connectors and replacement procedures for low-temperature work.

Products

Products in this category

All products

Cases

Related application cases

Related solutions and guides

Frequently asked questions

Can a standard high bay be installed in a freezer?

Only models verified for the target temperature, sealing and condensation conditions are suitable; wattage or IP rating alone is not enough.

Must cold-store lights stay on continuously?

Not always. Occupancy and schedule-based zoning can be used when sensors and drivers are rated for low temperature.

What data is needed?

Provide room temperature, dimensions, rack height, aisle width, operating hours, mounting positions and target illuminance.

Confirm the project selection

Send site dimensions, mounting height, environment and target illuminance for product matching.

Send project details