Product Category

LED High Bay and High Ceiling Lighting

LED high bay, high ceiling and UFO high bay lighting for factories and warehouses, with practical guidance on wattage, efficacy, mounting height, optics and controls.

LED high bay lighting is used in manufacturing halls, warehouses, assembly areas and maintenance zones. Selection should consider mounting height, task illuminance, efficacy, beam angle, structural obstructions and service access rather than wattage alone.

Yaoqian Lighting supports conventional high bays, UFO high bays and controlled high bay systems. Chip, efficacy and operating-temperature values vary by model, so final project selection should be checked against the product data and lighting layout.

Selection checklist

Selection factorProject check
Mounting heightFor 6-12 m spaces compare medium or wide beams and spacing; above 12 m check narrower optics, lumen output and floor uniformity.
Target illuminanceAisles, storage, assembly and precision work require different illuminance levels measured on the actual task plane.
Efficacy and thermal designHigh efficacy can reduce connected load, but driver reliability, heat dissipation and ambient temperature still matter.
Environmental protectionConfirm IP rating, sealing and operating temperature for dust, moisture, oil mist or low-temperature areas.
ControlsZoning, sensors, 0-10V or DALI dimming can reduce energy use in unoccupied zones.

Products

Products in this category

All products

Cases

Related application cases

Related solutions and guides

Frequently asked questions

What wattage should an LED high bay use?

Wattage depends on mounting height, area, target illuminance, efficacy and beam distribution. Typical wattages are only a starting point; the layout should confirm quantity and power.

UFO or traditional high bay?

UFO fixtures are compact and serviceable, while traditional forms can support different reflectors and distributions. Choose according to space, glare, thermal and mounting needs.

Can high bays use smart dimming?

Compatible models can use sensors, 0-10V, DALI or zone control. Driver interfaces and the control system must be confirmed together.

Confirm the project selection

Send site dimensions, mounting height, environment and target illuminance for product matching.

Send project details