Sports and high-mast content covers football, basketball, tennis, badminton, training-ground and mini-court lighting. Review drivers, thermal design, sealing, cleaning and spare-parts planning to reduce downtime and maintenance risk. This article covers site inputs, specific product directions, photometric checks, implementation and acceptance for B2B industrial lighting projects in Jiangsu, Zhejiang, Shanghai and the Yangtze River Delta.
Quick Takeaways
This section is written for procurement and engineering readers who need the conclusion before the details.
Match LED Football Field Light to the site environment before comparing wattage or price.
Area, clear height, mounting position, photos, target lux, operating hours and control needs.
A cheap fixture can fail the project if optics, glare, sealing, driver quality or service access are ignored.
Build a one-page project sheet and validate a pilot zone before full procurement.
Project Review Checklist
Before quotation or design review, prepare these inputs so the fixture model, quantity, mounting method and acceptance scope can be checked on the same basis.
Share dimensions, mounting height, ceiling structure, environment, operating hours and photos.
Confirm target illuminance, uniformity, glare control, color temperature and control requirements.
Compare wattage, efficacy, optics, protection rating, driver, mounting accessories and warranty scope.
Clarify wiring, brackets, installation sequence, commissioning and site safety responsibilities.
Keep measurement points, test status, product documents and maintenance requirements clear.
Use related product and case pages to compare similar site conditions and layout decisions.
Who this guide is for
This guide is for procurement teams, factory and warehouse managers, lighting designers, electrical contractors and project owners who need a traceable industrial LED lighting decision.
Use it for factories, workshops, warehouses, logistics centers, cold rooms, food or pharmaceutical plants, chemical areas, industrial parks, ports, airports, tunnels and sports facilities where the relevant site conditions are confirmed.
Key industrial lighting selection factors
- Mounting height and illuminance: define the work plane and target lux before choosing wattage.
- Optics and glare: compare beam angle, spacing, aiming, uniformity and visual comfort together.
- Protection and temperature: verify IP/IK, sealing, corrosion, low-temperature start or hazardous-area limits.
- Controls and maintenance: confirm DALI, 0-10V, sensors, manual override, driver access and spare parts.
- Commercial scope: compare manufacturer, model, price, warranty, delivery, installation and commissioning on the same basis.
Recommended product types
Select product types from the application first, then match actual parameters, photometric files, installation details and project documents.
Common selection mistakes
- Comparing wattage or unit price without a lighting calculation or pilot test.
- Using a standard luminaire in a cold, wet, corrosive, cleanroom or hazardous environment without verification.
- Ignoring glare, flicker, vertical illuminance, rack shadows or boundary spill light.
- Leaving mounting, wiring, controls, service access and acceptance records out of the quotation scope.
Project inquiry: Send site photos, area, mounting height, target lux, operating hours, environment and preferred control method.
Define the site conditions first
Confirm dimensions, clear height, mounting positions, obstructions, work-plane height, electrical circuits, operating hours and the existing fixture baseline. Add temperature, moisture, dust, corrosion, cleanroom or hazardous-area requirements where relevant.
Project details to confirm first
If the project brief is still incomplete, consolidate it into a one-page input sheet before asking for a quotation. This keeps supplier replies comparable and reduces repeated back-and-forth.
- Application area, process rhythm and daily operating hours.
- Mounting height, pole positions, obstructions and service access.
- Temperature, moisture, dust, corrosion or hazardous-area limits.
- Target illuminance, uniformity and glare limits for each zone.
- Control method, dimming range, fallback behavior and manual override.
- Acceptance records, drawings, photos, wiring notes and maintenance files.
Start with the site, then move to lighting parameters, then lock the acceptance scope.
Selection Matrix by Application
| Application | Product direction | Key review points |
|---|---|---|
| Factory / warehouse | LED high bay or UFO high bay | Height, optics, glare, driver, maintenance access |
| Cold storage / freezer | LED cold-storage light | Low-temperature start, condensation control, IP rating, rack shadows |
| Wet, dusty or clean areas | Tri-proof or cleanroom light | Sealing, cleanability, corrosion resistance, mounting and service |
| Hazardous area | LED explosion-proof light | Zone/classification, temperature class, cable entry, certificates and markings |
| Yard, road or loading area | Floodlight, area light or road light | Pole height, aiming, spill light, surge protection and controls |
Industrial lighting products and search terms
Relevant product directions include LED Football Field Light, LED Basketball Court Light, LED Training Ground High Mast Light. These product names help establish a comparison range; final wattage, optics, protection rating and quantity must be checked against the actual site.
Search Intent Covered by This Guide
A strong industrial lighting article should answer the buyer's real intent behind product-name searches, not only repeat keywords.
| Search direction | What the buyer is checking | Where this page answers it |
|---|---|---|
| manufacturer / supplier | Company capability, communication speed and project support | contact block, product links and project checklist |
| price / model / specification | Comparable quotation scope and technical parameters | comparison table, parameter notes and product pages |
| installation / wiring | Mounting, cable entry, control method and maintenance access | implementation workflow and acceptance records |
| LED Football Field Light | LED football field light / sports floodlight | Use field size, pole position, throw distance, uniformity and glare to select optics. |
| LED High-Mast Light | LED high-mast light specification / high-mast light manufacturer / industrial park high-mast lighting | Review mast height, lowering system, throw distance, wind load, optics, glare and high-level maintenance. |
| LED Floodlight | LED floodlight manufacturer / LED floodlight wiring / industrial floodlight price | Review throw, pole position, optics, aiming, glare, surge protection and bracket loading before wattage. |
| LED Area Floodlight | LED area floodlight / floodlight versus spotlight / 200W LED floodlight | Use area, height, spill light and glare to distinguish area coverage from long throw. |
LED product names and common procurement questions
These phrases summarize recurring buyer questions in China. They are organized as project questions, not exact search-volume claims or brand rankings.
LED Football Field Light
Common queries：LED football field light, sports floodlight
Use field size, pole position, throw distance, uniformity and glare to select optics.
LED High-Mast Light
Common queries：LED high-mast light specification, high-mast light manufacturer, industrial park high-mast lighting, sports high-mast lighting
Review mast height, lowering system, throw distance, wind load, optics, glare and high-level maintenance.
LED Floodlight
Common queries：LED floodlight manufacturer, LED floodlight wiring, industrial floodlight price, LED floodlight driver
Review throw, pole position, optics, aiming, glare, surge protection and bracket loading before wattage.
LED Area Floodlight
Common queries：LED area floodlight, floodlight versus spotlight, 200W LED floodlight, 400W LED floodlight
Use area, height, spill light and glare to distinguish area coverage from long throw.
Comparison and quotation scope
When comparing suppliers, keep model, actual power, efficacy, optics, protection rating, driver, warranty, delivery, installation and control scope in the same table. For high bays, hazardous-area luminaires, tri-proof units, cleanroom lights, cold-storage lights, floodlights and road lights, make sure the sample, photometric file and accessories match the quotation.
If the brief is still conceptual, write a one-page project sheet first: application, area, clear height, environment, target lux, control method, budget and delivery timing. This makes quotation responses easier to compare and supports pilot testing and acceptance later.
Energy Saving and Payback Check
For retrofit articles, calculate energy savings with the same operating assumptions: annual saving = (old total power - new total power) x annual operating hours x electricity price. Then add maintenance reduction, installation cost and control strategy before discussing payback.
Do not treat the formula as a fixed promise; measure the pre-retrofit baseline and verify post-retrofit illuminance before final acceptance.
Illuminance, efficacy and optical distribution
Efficacy indicates electrical efficiency, while optical distribution determines where the light reaches the working plane. Review beam angle, spacing, aiming, reflection and maintenance factor together instead of comparing wattage only.
Construction, protection and controls
Check thermal design, driver, voltage, power factor, surge protection, sealing, cable entry, mounting and service access. Sensor dimming and zoning should also be tested for trigger range, delay, minimum output and failure fallback.
Implementation workflow
- Record the existing illuminance, power, layout and operating baseline.
- Select construction, output, optics and controls from the site conditions.
- Validate a representative pilot area.
- Adjust spacing, aiming or controls before full installation.
- Repeat measurements and archive commissioning records.
Review drivers, thermal design, sealing, cleaning and spare-parts planning to reduce downtime and maintenance risk.
Project Checklist
- Confirm site inputs for maintenance and failure prevention
- Record design assumptions and measurable acceptance criteria
- Check installation, controls and maintenance access
- Archive product data, commissioning results and follow-up actions
Project documentation advice
Keep datasheets, photometric files, quotations, inspection reports, installation drawings, wiring diagrams, control notes, acceptance records and spare-part lists together so the project can be reviewed later without extra cleanup. For news content, use specific product names and site conditions rather than repeating the generic phrase “industrial lighting” too often.
Major Chinese standards for project review
Standard status was reviewed against official Chinese platforms on 2026-08-24. Confirm the current edition, implementation date, local requirements and contract scope before use.
GB 50034-2013Standard for Lighting Design of Buildings
Review illuminance, uniformity, glare, color rendering, lighting power density and controls.
Official recordGB/T 5700-2023Methods of Measuring Lighting
Lighting measurement methods with project-specific points, instruments, environment and control state.
Official recordGB/T 7000.1-2023Luminaires - Part 1: General Requirements and Tests
Current luminaire safety and test basis, effective from 1 January 2026.
Official recordGB/T 31897.201-2025Luminaire Performance - Particular Requirements for LED Luminaires
Current particular performance requirements for LED luminaires, effective from 1 May 2026.
Official recordGB/T 4208-2017Degrees of Protection Provided by Enclosure (IP Code)
Check dust and water protection; IP does not prove corrosion, low-temperature or explosion protection.
Official recordFrequently asked questions
Can the old fixture be replaced at the same wattage?
Not reliably. Efficacy, optics, mounting height and depreciation differ, so target illuminance and layout should be checked again.
What is needed for a quotation?
Provide the application, area, mounting height, photos, target lux, environment and operating hours.
How should suppliers be compared?
Use the same site assumptions and compare model, power, efficacy, optics, protection, driver, warranty, delivery, installation and control scope.
Contact Suzhou Yaoqian Intelligent Technology Co., LTD
Since 2006, Suzhou Yaoqian Intelligent Technology Co., LTD has worked on LED sources, thermal design, optics, industrial luminaires and smart controls, supporting product selection and project coordination.
Contact: Mr. Xie · +86 13915532167 · xieming113@163.com